150-180W CO2 laser power supply for folded CO2 tube and combine beam laser generator

Home>>English>>Products>>ZS series CO2 laser power supply

Products

ZS series CO2 laser power supply

ICO series YAG laser power supply

ES series UV laser power supply

Contact Us

Phone : +86 0531-85908792

Email:sales@rlaserpowersupply.com

Whatsapp: +86-15864507582

Wechat: +86-13295411923

Mobile :+86-13295411923

ZS-L150W-Y CO2 Laser power supply

1.It can support input voltages of AC180-260V or DC 280-350V.

2. It has light weight and small size characteristics, which is easily used on mobile vehicles.

3. It has CO2 laser tube damage protection. If the laser tube is damaged, power supply will not output current which protects the operator.

4. It has enhanced short-circuit protection and open circuit protection. In short circuit status, the power supply is in a protected condition and stop works. In an open circuit status, the power supply doesn't output high voltage and the laser tube does not work at all.

Order online

ZS-L150W-Y CO2 Laser power supply

Feature:

1.It can support input voltages of AC180-260V or DC 280-350V.

2. It has light weight and small size characteristics, which is easily used on mobile vehicles.

3. It has CO2 laser tube damage protection. If the laser tube is damaged, power supply will not output current which protects the operator.

5. It can be used to drive ordinary 150W sealed glass CO2 laser tubes. Two pieces ZS-L150W-Y laser power supplies can drive 300-350W combined beam laser generator and 300-350W folded CO2 laser tubes.

6.90-270V voltage stabilization function can be optional.

7. The current adaptive function is optional. Press the button, and the power supply's output current will automatically adjust to the value which matches with the laser tube and remain unchanged.

8. It uses silicon carbide instead of traditional diodes. Silicon carbide has low heat dissipation and low failure rate. So the power supply is durable and can adapt to high temperature and humid environments. The warranty is one year.

9.Due to silicon carbide, it also reduces complex circuit design and ensures power supply has consistent output parameters, which resulting in better laser cutting and engraving effects

10. It can use 0-5V analog signals or PWM signals to control the output power.

11. It has good grounding protection which can provide very safe protection for operators.

12. It uses H/L/P/G/IN/5V green terminal blocks to receive laser control signals and has an aluminum cover and base, which have good ventilation and heat dissipation functions.

13. Its terminal control is simple and reliable, which is suitable for high and low level signals. TTL level can be used to control the start and stop of laser power. At the same time, an abnormal protection switch has been added to detect whether it has external water through.

14. It adopts surface mount assembly technology, fully automated and standardized production line. Besides, it uses high-definition cameras to detect circuit boards, assembly components, and soldering effects. These methods reduce the possibility of human error causing unquolified CO2 laser power supply.

15. 180W CO2 laser power supply can be customized for buyer's technical requirement.

00 wire connection.jpg

Specification：

lnput	Input voltage			AC180-260V or DC 280-350V±10% (AC110V specified while order)
	AC frequency			47~440HZ
	Maximum input power			1000W
	Maximum input current			4.5A
Output	Maximum output voltage			50KV
	Maximum output current			45mA (depending on the laser tubes of different manufacturers)
Efficiency				More than 90% (Full load)
Response speed				Not more than 1ms
Control lnterace				TTL multilevel switching control,effective level can be high and low selection (see control wining diagram)
Insulation		lnput-output		AC 1500V 1 minutes not more than 10mA
		lnput-shell		AC 1500V 1 minutes not more than10mA
		Output-shell		Connection
Open Circuit Protection				Can be short circuit (requires a good grounding shell,while avoiding the positive electrode and the shell between the arc)
Environmental Requested			Working temperature	-10℃~50℃
			Storage of temperature	-20℃~75℃
			Relative Humidity	Maximum 85%RH (non-condensing)
			Altitude	100,000 feet of work 200,000 feet of storage,dose not work
Cooling methods				Forced air cooling (fan cooling)
Dimensions (LxWxH)				350mmx123mmx56mm